Setup Network using Wizard

Windows XP

To setup the network using the wizard

Go to control panel (This link will open in a different window)
Double-click on Network Connections
Click on set up a home or small office network
Follow the prompts on the wizard.
Make sure all computers have the same workgroup name (capitalization has to match)
Make sure each computer on the network has a different computer name.
Reboot the computer
Now you need to share a file on the system
If you are using a router you will need to make sure the settings for your router are correct. You will need to consult the manual for the information on the specific router.
You should be able to see each other.
If you still can't get it to work, check the security level on the system. You may have to lower it.

Contact Email: Support@upgradenrepair.com

DISCLAIMER:UpgradeNRepair (UNR), the owner, and any representatives of UpgradeNRepair (UNR) is not liable for any data loss or hardware failure because of the following procedure. The Information provided is a guide to assist the customer with an issue with their system or software. The procedures offered here may or may not harm your files. Even procedures that are not designed to harm files, can harm files, depending on the issue with the system. Because there is too many unknowns, UpgradeNRepair is unable to guarantee the safety of the files. Customer is responsible for their data and their actions. Before following the directions on this page and the pages these links are linked to, any data the customer does not want to lose will have to be saved. Saving the data is the sole responsibility of the customer. Some or all of the following procedures or information may not apply to your situation.