Modifying the Winnt.bat file

Modifying the Winnt.bat file to Integrate Unattended file into Windows XP install CD

If you want to integrate the unattended file into the windows XP CD, you have to modify the Winnt.bat file so windows will look at the CD for the Winnt.SIF file instead of the floppy.

Before you create the CD, be sure to have this file and the Winnt.sif file in the I386 folder. Here is the information that needs to be on the winnt.bat file.

rem SetupMgrTag
@echo off

rem
rem This is a SAMPLE batch script generated by Setup Manager.
rem If this script is moved from the location where it was generated, it may have to be modified.
rem

set AnswerFile=.\winnt.sif
set SetupFiles=.\i386

D:\i386\winnt32 /s:%SetupFiles% /unattend:%AnswerFile% /copysource:lang

Contact Email: Support@upgradenrepair.com

DISCLAIMER:UpgradeNRepair (UNR), the owner, and any representatives of UpgradeNRepair (UNR) is not liable for any data loss or hardware failure because of the following procedure. The Information provided is a guide to assist the customer with an issue with their system or software. The procedures offered here may or may not harm your files. Even procedures that are not designed to harm files, can harm files, depending on the issue with the system. Because there is too many unknowns, UpgradeNRepair is unable to guarantee the safety of the files. Customer is responsible for their data and their actions. Before following the directions on this page and the pages these links are linked to, any data the customer does not want to lose will have to be saved. Saving the data is the sole responsibility of the customer. Some or all of the following procedures or information may not apply to your situation.